Sigma 4 supplies as standard a supplementary dedicated valve chest which is operated by means of a very handy cable joystick. The hydraulic system is customized for each tractor model and so is the joystick positioning in the cabin to guarantee the best comfort and adaptability. The above equipment keeps free the original tractor valve chests and to control, in an easy and precise way, all functions of the front loader. The lever is also provided with a safety locking system meant to prevent accidental movements.
TC PROFI
Optional electric push-buttons allow the operator to control electro-hydraulic selectors for the operation of implements with additional hydraulic services. If compatible with the tractor fitted, 2 supplementary buttons enable the high-low transmission functions to be operated via the joystick.
TC SPEED
This is a proportional electronic control conforming to CAN BUS technology. The joystick is fully ergonomic and, thanks to the tiny dimensions, it can dramatically reduce the operator's strain while working, as well as being easily positioned on the armrest of the tractor seat for full accessibility and ease of operation. Besides standard loader functions such as lift/lower and tip/crowd, it is possible to select the boom float function (a standard feature with this type of joystick control), to adjust the speed of each single operation and sensitivity, to pilot electro-hydraulic selectors for additional hydraulic services. On top of this, there are push buttons for the Fast/Slow operation and emergency control.
Designed to allow the easy and quick change of implements. The loader is supplied, on a standard basis, with the EURO system conforming to ISO 23206 standards. This allows the fitting of all implements manufactured by third parties and conforming to these standards. Alternatively, a heavy-duty SIGMA 4 implement fitting system can be supplied. The latter can receive only attachments manufactured by ourselves.
HYDRO SYSTEM
Designed for extra comfort, the change of implements can be operated from the tractor seat. The hitching and un-hitching is performed by simultaneously pressing 2 buttons on the joystick, thus avoiding unintentional operation and granting the highest possible level of safety. The HYDRO SYSTEM requires a dedicated supplementary hydraulic line for its functioning.
DUAL SYSTEM
Designed to allow the simultaneous use of implements either conforming to the EURO standards or having the MX hitching type. For the latter it is necessary to fit relevant so-called “MX adaptors”.
COMBI SYSTEM
Designed to allow the simultaneous use of implements either conforming to the EURO standards or having the ALO/Q3 hitching type. Moreover, by fitting dedicated “MX adaptors”, the same faceplate can also receive implements having the MX hitching type.
Loader/tractor quick-release system. No tools required, only a simple movement of a lever placed on the side of the frame is sufficient to complete fitting/unfitting operation of the loader in a few seconds.
The hitching/unhitching positions are shown by a dedicated decal. The device is designed for full passive safety. Support legs are fitted with a fine-adjust system to ensure full stability in all conditions.
All SIGMA 4 models are equipped with this feature.
Subframes are a significant achievement for SIGMA 4 and a reference for everybody in the industry. They are connected to the tractor main frame in 3 points (front axle, bell-housing/gearbox area, rear axle) for an ideal distribution of loads, a solution that offers the best in terms of rigidity and ruggedness of the unit, for unsurpassed performance. Every tractor has a proper mounting subframe. Particular care is also put in the design of mounting solutions for full accessibility to tractor for standard service operations, without having to remove any parts. Steering angles are not impaired and full compatibility is assured with mudguards, front linkages, different types of pick-up hitches and cabs.
The “FLASH” multi-connector device allows the operator to easily and quickly connect/disconnect, with a single operation, all hydraulic lines, thus avoiding possible connection errors. The device is fitted as a standard on TITANIUM and PLATINUM models, while it is an option on the GOLD and on the IRON ranges.
GENIUS SYSTEM
ANTI-BOUNCE SAFETY SYSTEM Two anti-shock accumulators provide enhanced comfort and safety during loading and transport phases. Shocks and stress on all components are significantly reduced when using the GENIUS system and the benefits are more evident as the speed and load increase. The device is a great achievement in terms of safety, operator's comfort and reduced stress for tractor tires and front drive components. It is fitted as standard with a cross cover which protects it from impacts and wearing agents. Standard feature of the GENIUS system is also an exclusion tap which enables its switch-off whenever needed. The device is fitted as a standard on GOLD, TITANIUM and PLATINUM models, while it is an option on the IRON range.
QRC FLASH
Convenient tool for connecting the hydraulic pipes of implements fitted with a 3rd hydraulic function. With a single operation, the implement's hydraulics are easily connected, even when pressurized. The QRC FLASH can be easily cleaned, thus avoiding any dirt in the loader hydraulic system, and by consequence into the tractor's hydraulic system.
3SL - 4SL
They allow the use of implements with additional hydraulic requirements, such as grabs, side-shifts, extra-lifts, etc. The electro-valves are supplied as standard with a plastic cover to protect them from impacts and wear.
HYDRAULIC SELF-LEVELLING SYSTEM The implement's self-levelling system is performed by the proportionally-sized rams A connected by a closed circuit to the bucket's rams B. When lifting the boom, the compensator rams expel oil that goes into the bucket's rams and determines the automatic implement's self-levelling. The same happens when the boom is lowered.
The compensator cylinders determine also create an increase of the lifting power: the load Q on the implement generates a pressure first in the bucket's rams and then, consequently, in the compensator rams. The power increase deriving from above is about 10-12% of the load Q. The hydraulic self-levelling system is supplied as standard in the front loaders series “H”.
MANUAL IMPLEMENT LEVELLING It is a distinctive feature of our “F” series. The operator, by using the joystick, has full control of the angle of the attachment in relation to the boom angle while lifting and lowering the loader.
MECHANICAL SELF-LEVELLING SYSTEM The mechanical self-levelling system is supplied as standard on the front loaders series “M”. By means of this system, the load is held in the same position throughout the full travel of the boom, resulting in an increased lift capacity. The variable geometry parallel linked system creates large working angles, thus enhancing performances and ease of operation.
GREASE NIPPLES On all points more exposed to wear, Sigma 4 fits as standard grease nipples that are positioned inside the pins and oriented towards the outside, thus ensuring easy lubrication and complete protection from possible damages.
BUSHES AND PINS All articulated points are fitted with highly wear-resistant and self-lubricating bushes made of K4, a very innovative plastic polymer. All pins are made of heavy duty steel and are fitted with a greasing point placed on the inside.
BOOM ENDS Boom ends in cast steel, are pressed and welded into boom for strength and long life with a nice finish as well as a sense of industrialised product.
BOOM ENDS Boom ends in cast steel, are pressed and welded into boom for strength and long life with a nice finish as well as a sense of industrialised product. PAINT PROCESS All loader components are subject to a preparation cycle prior to painting, consisting of: sand-blasting, phosphating and pickling treatments. After this, the components are primed and finally powder coated. A long process that assures ideal results in terms of paint finish and protection against weathering agents.
EASY MAINTENANCE We design our subframes as to allow access to tractor parts that need regular servicing.
HYDRAULIC PIPE SUPPORT Our front loaders are fitted as standard with a flex pipe support plate that can be adjusted in 2 positions to serve the purpose either with quick couplers or with the FLASH SYSTEM. Pipes are securely and safely held when loader is disconnected from the tractor.
BUCKET LEVEL GAUGE Standard feature to all of our models, the bucket level gauge allows the operator to easily check the angle of the implement to the ground from the tractor's seat and thus provide a very useful guidance for the operator.
SUPPORT LEGS A distinctive feature of our supporting legs is their length, compared to our competitors, and with our fine-adjust-system allow safe loader removal on all ground conditions. During operation they are locked on the inside of the loader boom without interfering in any way with the tractor's front wheels.
The new frontier of the SIGMA 4 front end loaders, the latest achievement combining top performances, advanced technology and greatest power, together with fully-accessorised equipment for daily professional use. This loader series has merged a harmonious and agreeable design to the force necessary to perform the heaviest duties of the agricultural work. The Platinum loaders are supplied as standard with the anti-bounce GENIUS SYSTEM and with the hydraulic multi-connector device FLASH SYSTEM.
The accessories fitted on the loader boom such as the GENIUS SYSTEM and the electro-valves for the 3rd and 4th hydraulic functions are also protected thanks to their placement on the cross bar, which safeguards them from possible damages and wearing agents.
BOOM SECTION The boom section is mono-bloc, that is consisting of a single metal sheet duly bent and welded only in the lower area to form a solid structure which is robust and “light” at the same time, as well as nicely finished.
FULLY INTEGRATED HOSES AND CABLES
he new design with internal routing of hydraulic hoses and cables assures full protection to these components as well as enhanced visibility for the operator. The accumulation of dirt and residue on the pipes is prevented , but at the same time full accessibility is guaranteed to facilitate maintenance.
Front loader with hydraulic implement self-levelling system
Fitting brackets supporting loader from tractor front end to rear axle shafts
Hydraulic system conforming to tractor specifications
Standard equipment
Two double acting cylinders for lifting
Two double acting cylinders for the operation of the implement designed with double rod for faster implement unloading